Skip to main content
Saint-Tech

Rubber & plastics testing

Nicking cutter

ISO 34-1

The nicking cutter makes precise, uniform nicks in test specimens for tear resistance testing, ensuring consistent specimen preparation and reliable, repeatable test results in accordance with international standards.

The sample is held in guides to ensure correct location. When the apparatus is closed, the sample is clamped lightly between plates under a known spring pressure.

The apparatus raises the cutting blade to the correct level for the required depth of cut and then slices the sample to give a clean cut.

The apparatus is mounted on a baseplate that can be screwed to a bench. When the spring-loaded latch is released, the specimen clamp plate secures the sample.

The operating knob is then pushed in; in this position the blade cuts the sample. After two or three strokes the sample is removed.

A suitable lubricant should be used on the sample during cutting; otherwise the depth of cut may be incorrect.

Application:

  • Designed for accurate specimen preparation, the nicking cutter produces the clean, consistent nicks required for tear testing.

Specifications

Brand
Wallace Instruments · WAS6/3/6
Standards
ISO 34-1 Method B, ISO 34-1 Method C, ASTM D624 Type A and Type B
Dimensions (H × W × L, mm)
90 × 180 × 290
Weight
3.5 kg
Nick depth
0.5 mm, 1.0 mm

On request

All options (1)

Variants & pricing

  • Nicking cutter

    WAS6/3/6On request

Related products