Skip to main content
Saint-Tech

Photo 1 of 5

Rubber & plastics testing

Pneumatic cutting press S3

A compact 15 kN pneumatic press with a safety system for single-person operation. Adjustable height, quick and simple cutting die changeover, and automatic sample ejection.

The S3 pneumatic cutting press applies a cutting force of 15 kN with a cutting stroke of 30 mm, using 5 bar air pressure. A single operator controls the press by pressing two side push buttons simultaneously to cut test samples safely, up to 10 mm thick at a hardness of 95 Shore A.

The sample can be ejected by an ejector built into the cutter or by a sample ejector that is easily attached to the press. The sample ejector makes the press compatible with previously supplied cutters.

Because the ram position is offset, the replaceable cutting table lasts longer: it can be rotated and turned over, giving four cutting areas.

Application:

  • Cutting test samples typically used for physical tests such as tensile, tear, dynamic stress, viscosity and cure.

Calibration:

  • Manufacturer's calibration certificate included as standard

Specifications

Brand
Wallace Instruments · WAS3
Dimensions (H × W × D, mm)
500 × 410 × 310
Press weight
47 kg
Cutting mat dimensions (W × D, mm)
250 × 130
Maximum cutting force
15 kN
Cutting stroke (mm)
30
Maximum material thickness
10 mm / 95 Shore A
Required air pressure (min.)
5.0 bar, clean, dry, filtered air
Air inlet connector
Straight 8 mm × G¼ inch female connector for air supply
Storage temperature
−15 to +60 °C, ±0.2 °C
Operating temperature
+10 to +40 °C; altitude up to 2000 m
Humidity range
10 to 80% RH, non-condensing

On request

All options (1)

Variants & pricing

  • Pneumatic cutting press S3

    WAS3On request

Related products