Skip to main content
Saint-Tech

Photo 1 of 4

Rubber & plastics testing

Specimen cutting press S1

Designed for laboratory specimen preparation, the S1 specimen cutting press accurately cuts rubber and soft material samples with an adjustable-stroke, high-force mechanism that helps protect cutting dies and improve sample consistency.

The press is operated with two hands: one hand lifts the safety catch while the other pulls the handle, which drives the ram down through a lever system.

If the safety catch is not lifted, the ram cannot move, ensuring operator safety.

The ram stroke is easily adjusted so that the die cuts through the sample without itself being compressed, preventing damage to the cutting edge. As a further precaution, the operator is advised to place a suitable backing material on the cutting table to protect the very sharp edges of the cutter.

Articulated stainless steel fingers mounted on the press frame are adjusted to pass through the holes in the cutter back plate, so the sample is ejected automatically on the return stroke of the arm.

Note: the cutting table is 150 mm wide by 200 mm deep, and cutters must not exceed these dimensions.

Application:

  • Cutting test samples typically used for physical tests such as tensile, tear, dynamic stress, viscosity and cure.

Supplied with:

  • S1 specimen cutting press
  • Cutting board
  • User manual

Calibration:

  • Manufacturer's calibration certificate included as standard.

Specifications

Brand
Wallace Instruments · WAS1
Dimensions (H × W × D, mm)
840 × 150 × 360
Weight
31 kg
Cutting table dimensions (W × D, mm)
150 × 200
Maximum ram force
4.1 kN
Temperature range
60–250 °C, ±0.2 °C
Operating temperature
10 to 40 °C; altitude up to 2000 m
Humidity range
10 to 80% RH, non-condensing

On request

All options (1)

Variants & pricing

  • Specimen cutting press S1

    WAS1On request

Related products