Rubber & plastics testing
Thin film grips X17
Measuring tensile properties, especially ultimate tensile strength and elongation at break, is one of the most widely used physical tests on rubber and elastomeric materials and is used for quality control testing to international standards. Other tests that require extension of test pieces include tear resistance, creep, stress relaxation and tensile set, fatigue and crack growth resistance under cyclic deformation, and the adhesion strength of rubber laminates.
Difficulties are common when testing samples cut from thin sheets, films and finished products made of latex rubber and other highly extensible materials. Products made by dipping NR latex can extend up to ten times their original length and are often coated with a lubricant. Tests may be invalidated by slippage or breakage at the grips.
The TFG grip was developed to eliminate these problems. A combination of clamping and capstan effects prevents both slip and tearing while still conforming to the requirements of standard test methods.
The innovative design of thin film grips prevents slippage or breakage of thin samples in tensile testing. The X17 grips are suitable for compliant elastomeric material, paper, fabric and threads less than 0.2 mm thick.
Application:
- A combination of clamping and capstan effects prevents both slip and tearing while still conforming to the requirements of standard test methods.
Specifications
- Brand
- Wallace Instruments · WAX17
- Dimensions (H × W × D, mm)
- 75 × 40 × 27
- Weight
- 200 g (each)
- Maximum sample width
- 25 mm
- Maximum sample thickness
- 0.2 mm
- Maximum load
- 10 kg
- Operating temperature
- 10 to 40 °C; altitude up to 2000 m
- Humidity range
- 10 to 80% RH, non-condensing
On request
Variants & pricing
Thin film grips X17
WAX17On request
Related products

Digital bench thickness gauge
Dimensions (H × W × D, mm): 200 × 150 × 150 · Foot diameter: 3.7 mm and…
Price on request

Specimen cutting press S1
Dimensions (H × W × D, mm): 840 × 150 × 360 · Cutting table dimensions…
Price on request

Nicking cutter
Dimensions (H × W × L, mm): 90 × 180 × 290
Price on request

Pneumatic cutting press S3
Dimensions (H × W × D, mm): 500 × 410 × 310 · Cutting mat dimensions (W…
Price on request
